Test laboratory for optical, electrical and signalcables

With over 30 years' experience with cables and standards and our own testing facility, we use the most up-to-date methods of carrying out static or dynamic tensile, pressure and temperature cycling tests under environmental and operational conditions, in order to assess the quality of cables and connecting elements. All tests are reproducible and follow Fibre Optics CT's own test specifications. If the client so wishes, he may be present during testing.

We determine and evaluate the mechanical and trans-missional property changes that occur during and after testing. and support our clients with advice regarding the detection or correction of faults.

Besides optical and electrical cables, we also test fusion splice and plug connections, sensors, cable seals and connecting sleeves.



e.g. Static or dynamic tensile strength test on cable lengths up to 100 m.

Transmission, pneumatic or climatic tests in combined forms are also possible




Plug Connector test

Attenuation change Determination of attenuation change during temperature cycling


Combined tests

Determination of optical, lectrical, pneumatic, mechanical and/or climatic property changes in cables, plug connections, fusion splices, optical fibre sensors, etc.



Determination of optical, mechanical and pneumatic property changes.

Environmental performance and ageing.

A combined transmission and climatic test is also possible.




Fibre Optics CT GmbH
Consulting & Testing

Zazenhäuser Straße 52
D - 70437 Stuttgart

Tel.:  +49 (0)711 87 08 572
Fax.: +49 (0)711 87 12 30

Email: Service(at)FibreOpticsCT.de